RC Southeast » Track Listing » South Carolina Tracks » The Proving Grounds 2 (Sumter)

[Damifino]

1/8 Open Nitro Late Model Rules:

Section 1:
Chassis:


1-1 Must be 1/8 production based 4 WD buggy drive
train.(Losi,Ofna,X-Ray and so on)
1-2 No offsetting a-arms or narrowing of a-arms
1-3 Must have dog bone center drive train, no on-road
drive trains.
1-4 No one off chassis. Example: If you have a home
made chassis you must make one for anyone who wants
one at a reasonable price or let anyone copy it. As a
manufacturer or a person who would make one for
someone you don't have to let them copy it.
1-5 Wheel base: 12 5/8" to 13"
1-6 Width: 13" max. - 11 1/4" min.
1-7 Any and all parts must be flush or in side the tread
width. 1/8 tolerance.
1-8 All chassis and tires must remain inside the body.
1-9 No metal or carbon fiber front bumpers.
1-10 Must have foam on the front bumper.


Section 2:
Motors:
2-1 Any .28 or less
2-2 Modding is legal.

Section 3:
Bodies:

3-1 Molded one- piece bodies only.
3-2 No additional wings, flaps, spoilers, wickers, vents or
doohickeys will be allowed except what's in sections 4,5
&9.
3-3 A hole or holes for motor cooling
3-4 Decking is allowed
3-5 There will be no metal body parts of any kind.
3-6 All bodies must be approved.

Approved Body list:


C&M-2009 "ATOMIC"
Losi# losa8096
Ofna# 31143
RJ Speed# 1015 & 1030
A+ one piece
2009 Stalker
2010 Stalker SS
2010 Onstat LM


Section 4:
Side Dam specs:

4-1 Running a Side Dam is the tracks choice.
4-2 Side dam front leading edge must be at least 4" from
center of left front spindle with the wheels straight.
4-3 Side dam can be 5" tall from deck at it's highest point,
and cannot extend past rear spoiler.
4-4 Must have two tethers at least 8" apart.
4-5 Side dam must be on left side!

Section 5:
Rear Spoiler Specs:
5-1 Rear spoiler can only be as wide as the body at the
rear quarter panels.
5-2 Rear spoiler 3" max from deck.
5-3 The end caps must be a triangle shape.(See template)
You may have one fin on the spoiler and two side caps.
The third fin must also be the same dimension as side cap.
It can be located anywhere on the spoiler between the
two side caps. The fin must be in line with the side caps
on the front leading edge.

Section 6:
Wheel & Tire Specs:

6-1 Tracks choice on which tires are legal from approved
tire list!
6-2 All wheels must be 17mm buggy based.

Foam tire specs:
6-3 Max tire diameter- 106mm Max tire width- 46mm

Spec rubber tires:
6-4 There will not be any grooving or sipping of the
rubber tires.
6-5 Traction compounds are legal.

Approved list:
Ofna Tire Part # 86505 this is the pre-mount tire.
Losi Tire Part # LOSA17758
Losi Tire Part # Losa17757-450

Section 7:
Weight:
7-1 8-1/2 lb. At any time



1/8 Spec Nitro Late Model Rules:

Section 1,3,5,6 & 7 are the same for spec.
Section 1:
Chassis:

1-1 Must be 1/8 production based 4 WD buggy drive
train.(Losi,Ofna,X-Ray and so on)
1-2 No offsetting a-arms or narrowing of a-arms
1-3 Must have dog bone center drive train, no on-road
drive trains.
1-4 No one off chassis. Example: If you have a home
made chassis you must make one for anyone who wants
one at a reasonable price or let anyone copy it. As a
manufacturer or a person who would make one for
someone you don't have to let them copy it.
1-5 Wheel base: 12 5/8" to 13"
1-6 Width: 13" max. - 11 1/4" min.
1-7 Any and all parts must be flush or in side the tread
width. 1/8 tolerance.
1-8 All chassis and tires must remain inside the body.
1-9 No metal or carbon fiber front bumpers.
1-10 Must have foam on the front bumper.

Section 3:
Bodies:

3-1 Molded one- piece bodies only.
3-2 No additional wings, flaps, spoilers, wickers, vents or
doohickeys will be allowed except what's in sections 4,5
&9.
3-3 A hole or holes for motor cooling
3-4 Decking is allowed
3-5 There will be no metal body parts of any kind.
3-6 All bodies must be approved.

Section 5:
Rear Spoiler Specs:

5-1 Rear spoiler can only be as wide as the body at the
rear quarter panels.
5-2 Rear spoiler 3" max from deck.
5-3 The end caps must be a triangle shape.(See template)
You may have one fin on the spoiler and two side caps.
The third fin must also be the same dimension as side cap.
It can be located anywhere on the spoiler between the
two side caps. The fin must be in line with the side caps
on the front leading edge.

Section 6:
Wheel & Tire Specs:

6-1 Tracks choice on which tires are legal from approved
tire list!
6-2 All wheels must be 17mm buggy based.

Foam tire specs:
6-3 Max tire diameter- 106mm Max tire width- 46mm

Spec rubber tires:
6-4 There will not be any grooving or sipping of the
rubber tires.
6-5 Traction compounds are legal.

Approved list:
Ofna Tire Part # 86505 this is the pre-mount tire.
Losi Tire Part # LOSA17758
Losi Tire Part # Losa17757-450

Section 7:
Weight:
7-1 8-1/2 lb. At any time


Section 8:
Spec Motors:
8-1 Must be Box stock,no modification at all!
8-2 Different glow plug heat ranges can be used.
8-3 No turbo plugs

Approved Motor list:
RB S3
OS VG
Nova BF .21
Losi 350 3 port part # losr2300-450

Section 9:
Side Dam specs:
9-1 Running a Side Dam is the tracks choice.
9-2 Side dam front leading edge must be at least 4" from
center of left front spindle with the wheels straight.
9-3 Side dam can be 3" tall from deck at it's highest point,
and cannot extend past rear spoiler.
9-4 Must have two tethers at least 8" apart.
9-5 Side dam must be on left side!



1/8 Electric Late Model

Section 1,3,4,5,6 & 7 are the same for Electric.

Section10:
Motors:
10-1 Any 2250(KV) or less brushless.

Section 11:
Batteries:
11-1 Any 14.8v- 5,000(mAh) 4s- 40c or less
11-2 Series- Any two 7.4v-5,000(mAh) 2s-40c or less

Section:12
Speed Controller:
12-1 Any

Section 13:
Approval process:
13-1 Motor, tire and body approval will be done on a
submit with a test and trial period by the DLMRA. Any new
product will have a 60 day period after approval before it
will be made legal to run.
13-2 All products for the 2010 season must be submitted
by 3-31-10.
13-3 Anyone with a product to submit e-mail me at
mikeo@ottsspeedshop.com

Section 14:
Tracks:
14-1 The track has final say on rules enforcement!

Section 15:
15-1 The DLMRA is not responsible for any actions by
tracks or racers!
http://www.ottsspeedshop.com/familyrctempletb.html
Link for spoiler rules

[marcuswelch]

Section 9:
Side Dam specs:
9-1 Running a Side Dam is the tracks choice.
9-2 Side dam front leading edge must be at least 4" from
center of left front spindle with the wheels straight.
9-3 Side dam can be 3" tall from deck at it's highest point,
and cannot extend past rear spoiler.
9-4 Must have two tethers at least 8" apart.
9-5 Side dam must be on left side!



it says it up to the track thats y i was asking...the motor in the spec class says OS VG what the number on it .21 or what

[Damifino]

the OS VG is a .21 all motors on that list are .21's

as far as sidedams go we will only run them on the modified class
at least that was what i was told by Don and Lance

i have sent Mike Ott a e-mail to see if we can get this tire approved

http://www3.towerhobbies.com/cgi-bin...?&I=LXTVB4&P=7

[marcuswelch]

nice looks good that for sure....