XRAY parts!

[ChampionRC]

Heads up for anyone that drives an 808. I have a TON of left over parts from ModHobby, and I am clearing out space here to make room for new product for ChampionRC. All parts will be at or below cost. I am listing them on ebay starting today, so keep checking back.

If you are interested in buying some or all (special deal for all), ring me up at 404.642.8225

http://stores.ebay.com/championrcstore

[ChampionRC]

All items are new and in package.

shipping between $5.99 - $11.99 depending on qty.

(1) - $22.00 - XRA352092 - Graphite Front Shock Tower
(2) - $3.00 - XRA333450 - Anti-roll Bar Ball Joint 5.8mm (2)
(2) - $3.00 - XRA352130 - Front Upper Arm
(2) - $3.00 - XRA352151 - Front Upper Arm Ball Joint (2)
(9) - $3.00 - XRA352212 - Composite Caster Block 10 right
(7) - $3.00 - XRA352222 - Composite Caster Block 10 Left
(9) - $4.00 - XRA352252 - Composite Steering Block Right
(6) - $4.00 - XRA352262 - Composite Steering Block Left
(2) - $3.00 - XRA352486 - Front Anti-Roll Bar 2.6MM
(1) - $20.00 - XRA352500 - Servo Saver Complete Set - V2
(3) - $6.00 - XRA352611 - Adj. Turnbuckle M4 L/R 51MM (2)
(1) - $5.00 - XRA352652 - Ball Stud 6.8MM (4)
(2) - $24.00 - XRA353092 - Graphite Rear Shock Tower
(2) - $4.00 - XRA353114 - Composite Rear Lower Suspension Arm
(3) - $3.00 - XRA353131 - Rear upper inner camber link ball joint (2)
(2) - $3.00 - XRA353152 - Rear upper outer camber link ball joint
(5) - $5.00 - XRA353160 - Mounting ball 6.8 (4)
(6) - $3.00 - XRA353351 - Composite Rear Hub Carrier
(1) - $2.00 - XRA353371 - Composite Lower Arm Shims
(1) - $3.00 - XRA353482 - Rear anti-roll bar 2.2MM
(2) - $3.00 - XRA353484 - Rear anti-roll bar 2.4MM
(2) - $4.00 - XRA355020 - Dif Case
(2) - $24.00 - XRA355043 - Front/Rear Dif Large Bevel Gear 43T
(3) - $13.00 - XRA355060 - Front/Rear Diff Outdrive (2)
(2) - $13.00 - XRA355062 - F/R Diff Outdrive (2)
(6) - $13.00 - XRA355070 - Center Dif Outdrive Adapter (2)
(1) - $3.00 - XRA355090 - Diff Gasket (4)
(1) - $7.00 - XRA355211 - CVD Drive Axle
(2) - $11.00 - XRA355221 - CVD Universal Drive Shaft
(3) - $8.00 - XRA357331 - Rear Lower Outer Pivot Pin Screw 3mm (2)
(2) - $2.00 - XRA358040 - Hardened Shock Shims (4)
(1) - $6.00 - XRA358140 - Alu Shock Body Nut (2)
(1) - $5.00 - XRA358183 - Front Spring Set .70
(1) - $5.00 - XRA358185 - Front Spring Set .80
(2) - $30.00 - XRA358718 - Alu Engine Mount Novarossi, RB, Max, JP, Sirio
(2) - $30.00 - XRA358719 - Alu Engine Mount PICCO, MEGA, Orion, LRP, OS
(3) - $4.00 - XRA358840 - Air Filter/Foam
(2) - $3.00 - XRA902418 - Hex Screw SH M4x18 (10)
(3) - $3.00 - XRA970100 - O-ring 10X1.5 (10)
(1) - $3.00 - XRA971035 - Silicone o-ring 3.5x2 (10)
(3) - $3.00 - XRA980317 - PIN 3x17 (10)

[rcworks216]

championrc

I'll take these. you still have them? is shipping included in price? if not whats the shipping to 27616

(1) - $30.00 - XRA352303 - Alu. Front Lower Susp. Holders Set Swiss 7075
(1) - $30.00 - XRA353303 - Alum Rear Lower Susp. Holders set swiss 7075

email is csdonnie2005@yahoo.com
pay pals the same

[ChampionRC]

championrc

whats the shipping to 27616. I take these. you still have them?

(1) - $30.00 - XRA352303 - Alu. Front Lower Susp. Holders Set Swiss 7075
(1) - $30.00 - XRA353303 - Alum Rear Lower Susp. Holders set swiss 7075

email is csdonnie2005@yahoo.com
pay pals the same

Yes, you are the 1st responder.
Shipping USPS:$5.99

[rcworks216]

whats your pay pal or send me an invoice for the amount. so thats 66 bucks?

[ChampionRC]

whats your pay pal or send me an invoice for the amount. so thats 66 bucks?

Paypal request sent.

[rcworks216]

money sent. thanks

[rcworks216]

hey alex. did you get a chance to drop those parts in the mail? maybe today or fri i will see it. Thanks

[ChampionRC]

hey alex. did you get a chance to drop those parts in the mail? maybe today or fri i will see it. Thanks

Should be there tomorrow or Saturday.

[rcworks216]

ok thanks.

[rcworks216]

got the stuff today. Thaks Alex. let me know what you sale of the rest of the xray parts i might need other stuff later.

[ChampionRC]

got the stuff today. Thaks Alex. let me know what you sale of the rest of the xray parts i might need other stuff later.

I am keeping the list here updated as I sale them. Not too many takers yet. I know there has to be a need for diff cups and stuff like that.

[rcworks216]

do you have this part for the xray 808? XRA352575
do you still have this part? (1) - $20.00 - XRA352500 - Servo Saver Complete Set - V2
i know part#352575 comes with 352500 but i dont REALLY NEED the whole thing. could use it but you know. let me know thanks

[ChampionRC]

do you have this part for the xray 808? XRA352575
do you still have this part? (1) - $20.00 - XRA352500 - Servo Saver Complete Set - V2
i know part#352575 comes with 352500 but i dont REALLY NEED the whole thing. could use it but you know. let me know thanks

Looks like I sold that on ebay a couple of weeks ago. All these parts are listed on ebay as well. Sorry. I can order anything you need though if you can't find it elsewhere.

[rcworks216]

ok thanks

[rcworks216]

can you get or do you have 352576 its the steering plate bushing for a 808. amain sent me the wrong one. 352575 for a xb8. im going to send it back but they want me to pay all over again. let me know.

[ChampionRC]

can you get or do you have 352576 its the steering plate bushing for a 808. amain sent me the wrong one. 352575 for a xb8. im going to send it back but they want me to pay all over again. let me know.

I don't have it. I could get it but I don't have plans for ordering anything from Xray for a bit since I don't need anything. Unless I can get a bigger order together for people, I will.

[rcworks216]

ok, I'll let you know if i need any more parts. i got a email and amain is sending me the right part.

[rcworks216]

Alex you have 352114? I need 2. if so what the total.

[ChampionRC]

Alex you have 352114? I need 2. if so what the total.

Yep, got 2 left $8 plus $3 shipping. $11 total. Can go out today, paypal is sales@championrc.com

thanks man.

[rcworks216]

ok thanks. money is on the way.

[ChampionRC]

ok thanks. money is on the way.

Packaged up and will drop in USPS later today.

[rcworks216]

Thanks

[rcworks216]

Alex you have 352114? I need 2. if so what the total.

hey alex, you sent me 353114.

[ChampionRC]

hey alex, you sent me 353114.

Crap. Sorry. Let me check again.

[ChampionRC]

Ok, I checked again, I don't have the correct part number you wanted. If you want those arms, keep them. I will refund your money too. Sorry for the mix up.

[rcworks216]

hey Alex, i dont need the rear arms but i can use them. whatever you want me to do i can do. im getting a list of parts together for your. i had my rear bulkhead bearing blow out this weekend. to sets of bearing!! shouldnt it be a spacer between the bearings? i know about the new bulkhead but i got my 808 used so im not sure how to tell the 808 808 updated and 808 09 apart. but things coming loose put a little wear on my rear trans.

[rcworks216]

you know anyone thats selling a 808 roller?

[rcworks216]

do you have these parts? XRA355043- i see this one on your list of parts.
XRA355111. Thanks

[rcworks216]

this is my list. let me know what you have. Thanks

358042
355111
358041
355043
352075
352002
941319

[ChampionRC]

this is my list. let me know what you have. Thanks

358042
355111
358041
355043
352075
352002
941319

The only one I have in that list is:

$24.00 - XRA355043 - Front/Rear Dif Large Bevel Gear 43T

[rcworks216]

ok, if you still have it. I'll get it next friday. Thanks.

[ChampionRC]

ok, if you still have it. I'll get it next friday. Thanks.

Cool.

[rcworks216]

Alex you still have the part? also how much are the 811 going for?

[ChampionRC]

Alex you still have the part? also how much are the 811 going for?

Yes, I still have the part. 811-> $519 plus free shipping. I sold all but one. I haven't checked yet if they have open stock, as i had been on pre-order with them for a while when it was announced. Also, should be getting some parts for it as soon as it they are available.

[rcworks216]

ok, I'll send the money today. can you give me a new list of what you have left for the xray. I wont sale my xray but the 811 is really growing on me. I'm just waiting for more "joe racer reports". i'll have to wait on the 2nd or 3rd batch of 811, I want all the kinks worked out.

[rcworks216]

hey alex did you send out the package yet?

[ChampionRC]

hey alex did you send out the package yet?

Sorry for the delay, going out today. Need me to pack anything else in there?

[rcworks216]

yeah, now that i think about it. XRA358185 you still have these? grey blue front springs? ill send the money later today.

[ChampionRC]

yeah, now that i think about it. XRA358185 you still have these? grey blue front springs? ill send the money later today.

Yep. I will throw those into the package as well.

[rcworks216]

Thanks

[rcworks216]

i sent 6 bucks to help with the pp fees.

[ChampionRC]

i sent 6 bucks to help with the pp fees.

Cool thanks, I sent it out yesterday. Let me know when you get it.

[rcworks216]

I got the package yesterday Alex. thanks