Speed Specials...

[ABURTON]

Here is where I'll post specials throughout the race seasons for you guys. Thanks!

[ABURTON]

Racers, The Speed Shop wants to wish everyone a happy holiday season! We are going to offer some things over the next 12 "shipping" days as our 12 days of Christmas sale..

Anything postmarked/sent on these days will get the said offers

December 10th- Sleeve Pinch $5(piston/sleeve only) $10(complete engine)

December 11th- Engine bearing replacment $40(includes tko ceramics)

December 12th- Engine Break in $30(includes 1000cc of fuel)

December 14th- Body/wing wrap install $15

December 15th- Tire Mount/Balance $5(includes glue and balance)

December 16th- Kit Build $40(any kit, contents of box)

December 17th- Factory Race Prep $30(includes new diff oil, shock oil, etc)

December 18th- Speed Shop Race Clean $10(complete clean and ready to go)

December 19th- Radio Tray build $5

December 21st- Speed Shop full engine break in $50(includes fuel)

December 22nd- Diff break in $15(need diffs only)

December 23rd- Pipe Clean $7

[ZIXXER]

HEY SPEED SHOP .....i need my pipes cleaned :o

[ChampionRC]

Racers, The Speed Shop wants to wish everyone a happy holiday season! We are going to offer some things over the next 12 "shipping" days as our 12 days of Christmas sale..

Anything postmarked/sent on these days will get the said offers

December 10th- Sleeve Pinch $5(piston/sleeve only) $10(complete engine)

December 11th- Engine bearing replacment $40(includes tko ceramics)

December 12th- Engine Break in $30(includes 1000cc of fuel)

December 14th- Body/wing wrap install $15

December 15th- Tire Mount/Balance $5(includes glue and balance)

December 16th- Kit Build $40(any kit, contents of box)

December 17th- Factory Race Prep $30(includes new diff oil, shock oil, etc)

December 18th- Speed Shop Race Clean $10(complete clean and ready to go)

December 19th- Radio Tray build $5

December 21st- Speed Shop full engine break in $50(includes fuel)

December 22nd- Diff break in $15(need diffs only)

December 23rd- Pipe Clean $7

Alan, does the engine break-in with bearings include both bearings? Standard or Ceramic?

Also, did you break in Puddin's GO's for RC Pro finals?

[ABURTON]

I did break in his engines.

I dont offer a engine break in with bearings, although we do offer a bearing replacment that includes front and rear TKO ceramics.

Does that help?

[ChampionRC]

I did break in his engines.

I dont offer a engine break in with bearings, although we do offer a bearing replacment that includes front and rear TKO ceramics.

Does that help?

Ah, hehe, I see what I did I read them so fast I combined two of them. Puddin, seemed to like his but had some weird carb issue*....What is your opinion on the new GO's?

Though, I do know they have redesigned the carb, so maybe it was a fluke at the finals with him.

[ABURTON]

This was a 5-6 year old ofna pipe that was dinged, dented, gouged, scratched, and had crud baked on the outside and inside.

The speed shop pipe clean does a couple things...

Not only does it get your pipe back looking as fresh as possible it also cleans the inside build up and gets things back like new on the inside!

http://img710.imageshack.us/img710/829/pipecleanbefore.jpg


http://img18.imageshack.us/img18/3923/pipecleanafter.jpg

[ABURTON]

We also Stock a lot of Kalgard products to keep your ride looking fresh!

We offer fast shipping!

$8 per can, two for $15, three for $20 plus shipping..

[JBURTON]

Hey bro, I need my pipes cleaned too.

[ZIXXER]

Ah, hehe, I see what I did I read them so fast I combined two of them. Puddin, seemed to like his but had some weird carb issue*....What is your opinion on the new GO's?

Though, I do know they have redesigned the carb, so maybe it was a fluke at the finals with him.

only my opinion ..go has always had carb issues ..a wise man once told me a nitro motor is only as good as its carb ...its a shame to because they have awesome power ;)

[burnettk]

only my opinion ..go has always had carb issues ..a wise man once told me a nitro motor is only as good as its carb ...its a shame to because they have awesome power ;)

i used to use to put grp carbs on mine.

[Team ck]

How large of a dent in a pipe (O.S. pipe) are you typically able to remove and by what process do you remove said damage and how do you clean them? (Hopefully I'm not asking for some Burton/NASA Top Secret level info here) :bigsmile:
Thanks for the info, and what would your normal turn around time be?

[ABURTON]

Send me a pic but usually I can get most of a very large dent out, I then have a large pot in a different room that I'll heat my chemicals and let the pipe soak over night. Then I just polish it up. I use anti freeze mixed with some other aluminum conditioners. If anyone decided to do it...DO NOT smell or sniff the fumes because it can really hurt you..lol

I can have it back to you in 2-3 days in your area.

$15 plus shipping back.

email me at alanburton20@gmail.com

[Team ck]

Thanks for the fast reply, I'll email you some pics. It's a side impact dent about the size of a quarter and maybe 1/16th inch deep.
Do you try to freeze the dent out?
Oh, thanks again for the deal you hooked us up with on the buggy, Kent loves it!!!

[ZIXXER]

Send me a pic but usually I can get most of a very large dent out, I then have a large pot in a different room that I'll heat my chemicals and let the pipe soak over night. Then I just polish it up. I use anti freeze mixed with some other aluminum conditioners. If anyone decided to do it...DO NOT smell or sniff the fumes because it can really hurt you..lol

I can have it back to you in 2-3 days in your area.

$15 plus shipping back.

email me at alanburton20@gmail.com

do not under any circumstances do that in th esame room or breath the fumes :dizzy:
take it from someone who did :)

[ABURTON]

From now until March 1st we will offer $65 kit build services. Spare yourself the time and let us do the work for you!

alanburton20@gmail.com

[ABURTON]

Thanks for the fast reply, I'll email you some pics. It's a side impact dent about the size of a quarter and maybe 1/16th inch deep.
Do you try to freeze the dent out?
Oh, thanks again for the deal you hooked us up with on the buggy, Kent loves it!!!

No problem!

Address is:

The Speed Shop
Alan Burton
4217 Park Circle
Helena alabama
35080

[ABURTON]

So I had this idea and we are going to do it. Throughout the 2010 year we are going to keep up with the customer who uses our shop/services the most in 2010.

At years end we are going to choose this person and give them a Speed services for free for the 2011 year!

This way each year it will be a different person who gets the package! All you have to do is pay shipping back and forth to the shop.

Thanks for the support guys and for quickly helping us grow into what we are striving to be!

[ABURTON]

http://www.avidrc.com/company/news/?id=70

Thanks to David at www.avidbearings for allowing me to join his team of accomplished racers!


We will also have these for use at the speed shop..

[JBURTON]

http://www.avidrc.com/company/news/?id=70

Thanks to David at www.avidbearings.com for allowing me to join his team of accomplished racers!


We will also have these for use at the speed shop..

Fixed bro, also SWEET!

[lowcountrytj]

So I had this idea and we are going to do it. Throughout the 2010 year we are going to keep up with the customer who uses our shop/services the most in 2010.

At years end we are going to choose this person and give them a Speed services for free for the 2011 year!

This way each year it will be a different person who gets the package! All you have to do is pay shipping back and forth to the shop.

Thanks for the support guys and for quickly helping us grow into what we are striving to be!

Pretty awesome deal,its always good to see folks giving back to the ones who keep ya goin.Thanks

[ABURTON]

We have them in stock guys..

Prep and shine
contact cleaner
30/30
filter oil
filter oil cleaner
pro shine
degreaser


Degreaser,prep shine, contact cleaner, and 30/30 is $9 a can

Pro Shine is $13

Filter oil and cleaner is $10

Free shipping on a case(can mix and match). A case is 12..