The Speed Shop Services....

[ABURTON]

We offer many services for the novice racer up to the veteran racer who may have other things that take up his/her time. We even keep some of the top factory racers going fast at races all over the world. We offer a fast turn around time to fit your schedule. If it has to do with racing we can do it!

Go fast with the Speed Shop!


Race preps

Kit Builds

Engine rebuilds

Break ins

Sleeve Resizing

Tuning

Shock builds/mods

Clean up

Tire mounting/balancing

Radio tray builds

Diff Break ins

Wrap Installs

Radio set ups

and more........

email me direct at alanburton20@gmail.com

Thanks!

Alan Burton

[ABURTON]

http://www.youtube.com/watch?v=LbHBFAbBAck

$30 for a race prep(500cc)

$60 for a partial break in(1000cc)

$90 for a full break in, track ready(1500-2000cc)

[ABURTON]

--------------------------------------------------------------------------------

http://redirectingat.com/?id=42X129556&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DLbH BFAbBAck

Just a little preview of a nova on the bench. This one had over 800cc on it.

We offer three different levels and all prices include fuel All price also include a tear down and inspection :

$30- 500cc. This gets several heat cycles on the engine. Will require more in car break in on your part.

$60- 1000cc. This is about 1/2 gallon of fuel. This is our most common service. Run in 3-4 more easy on track and it's ready. This is the method we use for our personal race engines.

$90- 1500-2000cc. A full break in, track ready. Just Install, tune to your conditions and go.

[ABURTON]

actory Race prep $60/$18 return shipping

This service includes a complete tear down for your race ride. We put our setup or yours on it. We will create a list of parts needed for you and replace all needed parts upon your approval. The Speed Shop includes fresh shock oil with shock rebuild, and fresh diff fluid with the Speed Shop's diff rebuild. We make sure everything is smooth, free, and tight. All areas are checked that need to be loctite and we top that off with a factory clean job using all high quality Kalgard products. You can have the same caliber car that the top pro's race with on any given weekend!(parts not included)

The Speed Prep $30/$18 return shipping

This is a quick service for our regular customers. This service is designed as a in between before your next Factory race prep. The Speed Shop will Give it a Factory Clean, using all high quality Kalgard Products. We will then check diffs and rebuild shocks making sure everything is up to par. We will install new clutch/clutch bearings, new air filter, set ride height, camber, gear mesh, and check over all the screw so your ride is Speed Shop approved for your next local race!(parts not included)

Speed Shop Full engine break-in $90/$12 return shipping(includes fuel)

Let the Speed Shop save you the trouble of that pesky break-in and do it in house! We have break in benches set up and offer the fastest turn around time in the industry. We have real world race level experience that stands behind our break ins! All engines done inside and in controlled enviroment. We put 1500cc-2000cc on the engine for you. We use our version of the heat cycle method. This option is 6-7 hours of running and several heat cycles.

Speed Shop Race Plus break-in $60/$12 return shipping(includes fuel)

Let the Speed Shop save you the trouble of that pesky break-in and do it in house! We have break in benches set up and offer the fastest turn around time in the industry. We have real world race level experience that stands behind our break ins! All engines done inside and in controlled enviroment. We put 1000cc on the engine for you. We use our version of the heat cycle method. This option puts 2-3 hours of running on the engine and several heat cycles.

Speed Shop Race Prep $30/$12 return shipping(includes fuel)

Let the Speed Shop save you the trouble of that pesky break-in and do it in house! We have break in benches set up and offer the fastest turn around time in the industry. We have real world race level experience that stands behind our break ins! All engines done inside and in controlled enviroment. We put 500cc on the engine for you. This option is designed to get things going for you the racer. This involves close to 2 hours of running, and several heat cycles. This option will need more break in on track.

Speed Shop engine rebuild $60/$12 return shipping

This service includes tearing down the engine and inspecting each part. We clean the engine to have it looking fresh. Our guys install new high quality TKO ceramic bearings front and rear and top that off with a light to medium race pinch. This is the same service we use on our race engines to keep them in top shape at events all around the world!

Speed Shop Sleeve resizing $20/$12 return shipping

For this we use only the best! We have a top of the line BMR racing products resizing tool. We take your complete engine, clean bearings(or we can install new) clean the internals, polish out any small scratches on the piston/sleeve and give you what we feel is the perfect pinch. We believe the this can only be accomplished by getting your complete engine and actually feeling the piston/sleeve at temp. We don't believe in the "super tight" theory. With the Speed Shop you get whats going to run best on the track!

Speed Shop's Wrap Install $25/$12 return shipping

We work with www.fastlanegear.com and can offer anyone a 20% code for use with Fastlane! If you want to make sure your awesome wrap is installed proffesionally this is the service for you! This includes paint, and the wing/body install. We will also do radio/starterbox wrap combo for same price. If we mess it up, we by you a new one!

The Pipe clean $10/$10 return shipping

Send us those old dirty, beat up pipes. If it's got tarnish, fuel, dirt, greae baked on we can get it off and make it look like new again. We let it soak in a chemical bath for 8-10 hours, without hurting the coating on your pipe. This improves runtime as well because that old stopped up baffle is going to be breathing like new again! After that we clean it up and top it off with a good polish!

Speed Mounting Tire service $7 per set/$10 return shipping(includes glue and cleaner)

Never worry about your tires coming unglued during that race! We have years of national level race experience and understand what it's like to prepare and work hard only to have a premount come unglued. We put air holes in the tire, clean the tires and rim and glue your tires. You then have a tire thats track ready and done by the best! No order to small or large!

[ABURTON]

My Speed Shop prepped Losi 2.0T ready for the Nitro Pit...

http://img407.imageshack.us/img407/9698/abtruggy.jpg

[Mr Electric]

Awesome looking truggy., Is that a vinyl wrap or all paint?

[ZIXXER]

Awesome looking truggy., Is that a vinyl wrap or all paint?

its a vinyl wrap from www.fastlanegear.com chad the owner of fastlane is a super good guy ..he do anything you need ....the body is painted underneath ...its easy to paint when your using a wrap you dont have to be really precise ...ive had many rc bodies painted and painted myself ...nothing beats a wrap for durability ...and they just look killer :firehead:

ive got one coming for my 8buggy ..it will blow your mind ..i will post up some pics when i get it and get it put on

[ABURTON]

yes sir a wrap f rom fastlane graphix, I can get you a code for 20% off anything over $75.

We can also get them put on for you at the shop..

[ABURTON]

Hey guys, we really like being here to help racers and along with the other tuners, etc I feel like this really helps the rc tech forum stand out.

We are also going to offer a chat session one night a week for a couple hours. Basically we will work off GMAIL chat since it's free, offers video chat, and is something we currently work off of as well. All you have to do is sign up for gmail(it takes 5 minutes) and then add us in chat(alanburton20@gmail.com)

We will be there to help with tips, setups, how to's, tire choices, our services, and so on...

Our new site is being tested right now. We are adding something to the product page that is called "Speed Bay"

Keep check on that as we will list our used tires, rides, and random things we feel are good enough to sale;)

[ABURTON]

Hey guys, just to let everyone know..

The Speed Shop can handle all of your electric racing needs. If your looking to convert that nitro powered ride over to electric we can handle it for you and give you a properly set up electric rig thats ready to win!

Email us at alanburton20@gmail.com

[ZIXXER]

this motor may look familiar to a certain phlip diddy ...this was a clean up pinch and new bearings ..heres some pics

BEFORE
http://i79.photobucket.com/albums/j122/zixxer1/SDC10673.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10674.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10675.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10676.jpg

AFTER
http://i79.photobucket.com/albums/j122/zixxer1/SDC10684.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10685.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10686.jpg

[phlip diddy]

this motor may look familiar to a certain phlip diddy ...this was a clean up pinch and new bearings ..heres some pics

BEFORE
http://i79.photobucket.com/albums/j122/zixxer1/SDC10673.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10674.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10675.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10676.jpg

AFTER
http://i79.photobucket.com/albums/j122/zixxer1/SDC10684.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10685.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10686.jpg

May not be the fastest out there, but ill be clean and smoth running engine
thanks agian....................great job, and speedy too:)

[ZIXXER]

May not be the fastest out there, but ill be clean and smoth running engine
thanks agian....................great job, and speedy too:)

hey phlip if need any help dialing in that p5 at the pnb ..lemme know ..still hoping we can all get a little rc village going on ..ask chris if he still wants those bowfighters i talked with him about .. i will bring em with me

[jzrevo]

Hey guys, just to let everyone know..

The Speed Shop can handle all of your electric racing needs. If your looking to convert that nitro powered ride over to electric we can handle it for you and give you a properly set up electric rig thats ready to win!

Email us at alanburton20@gmail.com


Very nice....I will be contacting you soon.

[phlip diddy]

hey phlip if need any help dialing in that p5 at the pnb ..lemme know ..still hoping we can all get a little rc village going on ..ask chris if he still wants those bowfighters i talked with him about .. i will bring em with me

Rc village for sure, You know what day yall be there?
I will be there on wed.

[ABURTON]

well it seems theres always a lot going on at the speed shop the week after a big race ...we are getting em lined up along with a ton of other customers who had sent in stuff while we were gone
http://i79.photobucket.com/albums/j122/zixxer1/SDC10730.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10731.jpg
http://i79.photobucket.com/albums/j122/zixxer1/SDC10732.jpg

[alarcracers]

I see a truhe ride sitting on the table... Alan, you get my email.. this is craig

[kel_racing]

No one has posted it so i will:

Big A turned 30 today,
I wrote a poem thats somewhat gay,
Try as he might, he cannot fight,
the fact that 40 is a short time away,
His heart is set on r/cs, although not affraid to spend time on his kn@@s,
begging for sponsorships you silly children,
taking care of all his r/c brethren,
Alan you're cool to all you friends,
enjoy your birthday to its very end!

Have a good one ALAN B. Happy birthday, you deserve it pal!

Kasey Lawrence

[ABURTON]

Starter box set-up/build service- Includes setting up the box, building contents, etc. We can also replace motors, resolder wires or add connectors to make box more reliable and ready for racing!

Email for pricing quote

alanburton20@gmail.com

[Bo Johnson]

Hey Alan, are those blue servos in your modded buggy Traxxas servos? They're the only company I have seen with Blue Cases like that.

-Bo

[jared52]

Hey Alan, are those blue servos in your modded buggy Traxxas servos? They're the only company I have seen with Blue Cases like that.

-Bo

Yeah, he used those in his World Record attempt buggy.

[ABURTON]

We do builds for so me of the best on the planet and we are wanting to get this service out in the market! If you need a kit that can take the abuse of those hour mains and hard weekends of local racing send it to us and don't worry about it!

This special is valid through MAY 15th 2010 and is good on any "kit"(1/10th, 1/8th on or offroad)

Price is $45 and builds contents in the box. Please email us at alanburton20@gmail.com

Thanks!

AB

[ABURTON]

Our goal at the Speed Shop is to offer racers of all levels great service at a affordable price. We have nearly 20 years of race experience at the highest levels. We are able to bring to you the same quality of car that the worlds best racers use on a weekly basis. In fact we prepare many of the worlds top racers weekly! We do anything related to racing and keeping the racer going fast! If you have questions on what we offer please feel free to call us. We offer driving seminars, pit services, and more! Let the Speed Shop “Torque and Tune” you today!

We are going to offer 3 “VIP” levels. Please Review the levels and what they offer and see what fits you the best. If you have any questions let us know, we can adjust the offers to better suite you! After deciding you can pay upfront and get your “Speed” treatment!

Level 1($250)
Includes the following:

3 Speed Shop “Race Prep” services($60 value each) Parts not included.

2 Speed Shop “Pinch Services”($20 value Each)

1 Speed Shop “Engine Rebuild” Service($60 value) and includes pinch and Avid/TKO Ceramics.

3 Speed Shop “Tire Mount” service($10 value each)

1 Speed Shop “Engine Break In” service($90 Value) Fuel included.

All return Shipping courtesy of The Speed Shop!

$550.00 Value!
__________________________________________________ _____________________

Level 2($500)
Includes the following:

8 Speed Shop “Race Prep” services($60 value each) Parts not included.

3 Speed Shop “Pinch Services”($20 value Each). >>>next page>>>

2 Speed Shop “Engine Rebuild” Service($60 value) and includes pinch and Avid/TKO Ceramics.

6 Speed Shop “Tire Mount” service($10 value each)

2 Speed Shop “Engine Break In” service($90 Value) Fuel included.

All return Shipping courtesy of The Speed Shop!

$1200 value!
__________________________________________________ ___________
Level 3($1000)
Includes the following:

15 Speed Shop “Race Prep” services($60 value each) Parts not included.

3 Speed Shop “Pinch Services”($20 value Each)

4 Speed Shop “Engine Rebuild” Service($60 value) and includes pinch and Avid/TKO Ceramics.

20 Speed Shop “Tire Mount” service($10 value each)

3 Speed Shop “Engine Break In” service($90 Value each) Fuel included.

4 Speed Shop “Wrap Install”($30 value each) Bodies not included.

All return Shipping courtesy of The Speed Shop!

$2100 Value!

Email us at alanburton20@gmail.com to discuss details, questions, etc.

[alarcracers]

Don't forget about the website dude... It's sitting there not being used man... :eek:

Our goal at the Speed Shop is to offer racers of all levels great service at a affordable price. We have nearly 20 years of race experience at the highest levels. We are able to bring to you the same quality of car that the worlds best racers use on a weekly basis. In fact we prepare many of the worlds top racers weekly! We do anything related to racing and keeping the racer going fast! If you have questions on what we offer please feel free to call us. We offer driving seminars, pit services, and more! Let the Speed Shop “Torque and Tune” you today!

We are going to offer 3 “VIP” levels. Please Review the levels and what they offer and see what fits you the best. If you have any questions let us know, we can adjust the offers to better suite you! After deciding you can pay upfront and get your “Speed” treatment!

Level 1($250)
Includes the following:

3 Speed Shop “Race Prep” services($60 value each) Parts not included.

2 Speed Shop “Pinch Services”($20 value Each)

1 Speed Shop “Engine Rebuild” Service($60 value) and includes pinch and Avid/TKO Ceramics.

3 Speed Shop “Tire Mount” service($10 value each)

1 Speed Shop “Engine Break In” service($90 Value) Fuel included.

All return Shipping courtesy of The Speed Shop!

$550.00 Value!
__________________________________________________ _____________________

Level 2($500)
Includes the following:

8 Speed Shop “Race Prep” services($60 value each) Parts not included.

3 Speed Shop “Pinch Services”($20 value Each). >>>next page>>>

2 Speed Shop “Engine Rebuild” Service($60 value) and includes pinch and Avid/TKO Ceramics.

6 Speed Shop “Tire Mount” service($10 value each)

2 Speed Shop “Engine Break In” service($90 Value) Fuel included.

All return Shipping courtesy of The Speed Shop!

$1200 value!
__________________________________________________ ___________
Level 3($1000)
Includes the following:

15 Speed Shop “Race Prep” services($60 value each) Parts not included.

3 Speed Shop “Pinch Services”($20 value Each)

4 Speed Shop “Engine Rebuild” Service($60 value) and includes pinch and Avid/TKO Ceramics.

20 Speed Shop “Tire Mount” service($10 value each)

3 Speed Shop “Engine Break In” service($90 Value each) Fuel included.

4 Speed Shop “Wrap Install”($30 value each) Bodies not included.

All return Shipping courtesy of The Speed Shop!

$2100 Value!

Email us at alanburton20@gmail.com to discuss details, questions, etc.

[ABURTON]

Hey guys,

The Speed Shop is going to offer a limited number of racers the chance to run on the Alabama Manf. Shootout Layout once again! Our plan is to get in the range of 20 racers together for one full day and hold a test and tune session. Our shop will provide the marshal and pit help for you. This would be more of a "class" where we help you on setups, tuning, driving lines, etc.

We would have the track as a group and get all the practice you could want. All you need to bring is your stuff ready to go!

This will be a saturday class/practice session. Starting at 7am and going to 8pm. We will have lights and ventilation going.

We are going to try to do this twice between now and september. The max number will be 20 racers per date.

If your interested in getting in on the list for the first date let me know asap. We have about 12 spots left. You can email me through the website:

The Speed Shop(Birmingham, Alabama)

or direct:

alanburton20@gmail.com

Thanks!

Alan Burton

[ABURTON]

Hello guys,

On July 10th 2010 from 7am to 8pm we will run a test and tune session for up to 20 racers at the Cullman Ag Center. This is setup primarily to help racers with driving lines, tuning, setup, and other things that go with putting up good race results. With a small number of people we will have lots of good clean practice time on a national level race track. The facility is the same one(same track) that held the Alabama Manf/ Shootout just a few weeks ago. Cost is $75($77.50 if using paypal) and that includes a lunch and help with the above mentioned from the Speed Shop. The cost also goes to cover the rental of the building, lights, and ventilation. With this format there will be no rush, no race pressure, no weather worries, and lots of track time for a small group of racers.

We will get a lot of track time and hopefully each of you will leave and have a better understanding of how to go faster and be better prepared. With that said you will only be as good as the equipment you have. So your equipment will need to be ready for a full race day. Have some new tires ready and lets have some fun!

http://www.youtube.com/watch?v=uyM0L...layer_embedded

If you have any questions please feel free to ask!

Send payment to alanburton20@gmail.com or mail check or money order to Alan Burton, 4217 Park Circle, Helena Alabama, 35080

As an attendant you get 13 hours of track time on the following:

professional/national level layout

prepared track surface and track

Indoor track with lights, power, and ventilation

Lunch and Drinks

Pit tables and Chairs

Shaded pit area

raised pit lane

large wheel chair friendly driver stand

corner marshal


We will cover the following during the class/session:

engine tuning

Tire selection

racing lines

jumping technique

setup/race preparation

throttle control

[ABURTON]

http://speedshop.alabamarcracers.com/index.php?option=com_content&view=frontpage&Itemid=1

[randall tune]

Hey AB are yall goin to offer the VIP package

[ABURTON]

Yes sir Randall...

Let me know what ya need! Email me at alanburton20@gmail.com

[ABURTON]

Hey guys, if you have a serpent cobra 811 or your thinking about the purchase let us know. We can get your kit built for you and set up with the latest setup or one of your choice. Your kit will have a professional build on it and ready to go!

For all of the current Serpent owners, we can also do race preps on your current car, keeping it in top shape and podium ready for you! We offer great prices you Serpent racers! In 2010 the Speed Shop had consistent podium results on the local, regional, national, and even great results at the 2010 IFMAR Worlds!

Email me for details @ alanburton20@gmail.com

[ABURTON]

Some of what we offer....

Kit builds
Race rebuilds
Shock builds
Wrap installs
Tire mount and balance
Engine Break in service
Engine Bearing replacement
Sleeve Re-sizing
Driving Classes
Set-up Changes
Pipe Cleaning
Pit man/Mechanic Services

The Speed Shop has many years of upper level racing experience. We feel we do the best work available on the market preparing some of the fastest racers in the world year to year. We do work for the racers who don't have the time to wrench, down to the new racers looking to stay well maintained and just focused on driving. Our shop is a full time operation, we average over 130 engine break ins a year, close to 200 kit builds/rebuilds, in 2011 mounted over 1,000 sets of tires, and 20-30 driving classes each year.

It's a full time deal doing something we love. We stay active racing over 100 times a year, starting on the club level, regional, and attending 8-10 national level events per year as well.

We hope you will consider us for business and if you see us at the races come up and talk to us! We just got back from the Dirt Nitro Challenge, next week will be attending the Psycho Nitro Blast, and in a few weeks will be at the Dialed Championships in Louisiana.

See ya soon!